POETRONICS INDUSTRIAL LIMITED
Deliver power to your dream
Add to Cart
IEEE 802.3af/at 10/100Mbps 150~250m Extension Range PoE Extender
Overview
POE-EX101 is a PoE extender that dedicated to extend the PoE transmission distance to 150 meters or more for power and data, it is a great solution to extend the Ethernet system network range over 100 meters at a very cost-effective way. The PoE extender PoE-EX101 is apply to most network device such as Wireless AP, IP Camera, VoIP, etc. which delivering power and data up to 250 meters while compliance with IEEE802.3af/at standards, and it’s Plug and Play works without additional power supply as it’s drove by the PoE itself.
The PoE Injector delivers PoE power over the first 150 meters to the POE-EX101 over Cat5 or better UTP cable, and then the POE-EX101 forwards the Ethernet data and remaining POE power to the PoE IP camera. It does not require an external power supply and can be installed easily by just plug and play, which means the operator does not need to configure to POE-EX101
It is a newly designed and simple device which extends both the reach of Ethernet Data and Power over Ethernet over the standard 150m~250m (492ft~820ft ) Cat5/5e/6 or better UTP cable.
Feature:
- Complies with IEEE 802.3af/at Power over Ethernet
- Extension range 150~250 meters
- Output power level up to IEEE802.3at standard (depends on actual power source)
- Compatible power supply pin 1,2/+ 3,6/- or 4,5/+ 7,8/-
- Delivers both Ethernet data and PoE power to remote devices
- Automatically detects and protects PoE equipment from being damaged by incorrect installation
- Multiple units, daisy-chain installation support
- No external power cable required for installation
- PnP (Plug and Play), Drove by PoE itself without additional power supply
Technical Specs
| Model | POE-EX101 | |
| Ports | PoE/LAN | PoE/LAN In: 10/100M, RJ45*1; PoE/LAN Output: 10/100M, RJ45*1 |
| Power Input | DC Socket: 5.5x2.1mm/5.5x2.5mm (Outer Diameter * Inner Diameter) | |
| Data Exchange | Store and forward, 10/100Mbps | |
| Bandwidth/MAC | 1G, 1K | |
| Ambient Environment |
Operating Temperature: -10℃~55℃ Storing Temperature: -20℃~75℃ |
|
|
Operating Humidity: 10%~90% RH Non Condensing Storing Humidity: 5%~90% RH Non Condensing |
||
| PoE In Standard | IEEE802.3af/at, Max. 30W | |
| Power Pins Assignment | Mode A: 12+/36- or Mode B: 45+/78- Switchable as required | |
| Power Input | DC Input: 48~57V, 30W max. (Used as single port PoE Mid-Span Injector) | |
| Standard Protocol |
IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at Power over Ethernet cable pairs or device |
|
| System Mode |
N: Normal operating mode, 150 meters extended distance S: Super remote transmission mode (10Mbps Full-Duplex), 250 meters extended distance |
|
| Connection/Power Attenuation |
Cascade connection is available as required, extended distance up to 300-500 meters; Extended distance/Corresponding Output Power: 150m/30Watts, 250m/20Watts, 500m/5Watts All above are theoretical values, it should be based on actual conditions. |
|
| Data Rate |
Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex |
|
| Network Medium |
10Base-T: 2 Pair Category 3(Cat3) and above UTP/STP(≤250m) 100Base-TX: 2 Pair Category 5(Cat5) and above UTP/STP(≤100m) |
|
| Size/Weight | Extender Size: 90*79*25mm (L*W*H); Net Weight: 0.21kg | |